Pages

Sunday, 22 April 2012

The Physics of Cricket: What is 'Swing Bowling'?

Hello, and welcome to the Aftermatter for the first instalment of a series on the physics of sport in the lead up to the Olympic Games, this week talking about Swing Bowling in cricket. Any of you who have watched cricket will have seen this effect; fast bowlers bowling balls that seem to swerve in mid-air. But why does this happen? And why do they constantly rub the ball against their trousers? And what about the mysterious 'reverse' swing?

To start off with, maybe I should show a video of some excellent swing bowling, so that those of you who don't follow cricket can see the effects of the physics I'm about to explain.

Ali's bowling there was an example of conventional inswing, that is, swinging towards the right-handed batsman. But how exactly did Ali make this delivery swing?

First let's look at a new cricket ball. It is spherical, with a leather outer layer, and has a "seam" forming a circumference around it, which sticks out a bit.
A new cricket ball. Note the prominent seam
To bowl this type of swing, a bowler must release the ball with the seam pointing in the direction he wants it to swing in, and at least one side of the ball should be as smooth as possible. This is why this type of swing works best with a brand new cricket ball: neither side will be particularly rough. 

When looking at the aerodynamics of an object, it is important to consider the "boundary layer," which is the layer of air directly adjacent to the object as it moves. There are two main types of boundary layers, laminar boundary layers, and turbulent boundary layers. In laminar layers, the air particles are quite uniform, and move over one another in layers. However, in turbulent layers, the position of the air particles is quite chaotic, and their motion more random. The following diagram, courtesy of NASA, shows this.
In conventional swing, one side is always kept as smooth as possible, to try and keep a laminar boundary layer, whilst the other side is left to become rougher naturally, as the boundary layer should be turbulent on that side. This is why cricket players rub the ball against their trousers; they are trying to keep one side of the ball as smooth as possible in order to create maximum swing. The diagram below shows a conventional swing ball.

The air hits the smooth face of the ball first, and a laminar boundary layer is formed in both directions. However, as we see at the top of the diagram, the seam 'trips' the air particles of the laminar layer, and a turbulent layer is formed. Now, turbulent layers cling to the surface of objects much more than laminar layers, which leave the object relatively early. This means that there is more air resistance near the top of the ball in the diagram above, and the bottom of the ball will travel faster. Since one side of the ball is travelling faster than another, the balls direction will curve towards the side travelling slower. This starts to happen at about 30 mph, and reaches a peak at about 70 mph, depending on the ball. After 70 mph, this effect is gradually reduced, until it comes to a complete standstill at about 90-95 mph. This is because, as the ball is bowled faster, the air becomes turbulent immediately upon impact of the ball, and thus the air is turbulent on both sides, and there is no force pushing the ball in either direction. But what happens if you bowl even faster than this?
If you did begin to bowl at 100 mph or more, then you may begin to notice reverse swing with even a new ball. The air becomes turbulent on impact with the ball, but when the air is tripped by the seam this time, the layer becomes even more turbulent! Very turbulent boundary layers actually break away from the object earlier than less turbulent ones, meaning that exactly the opposite of what happens in conventional swing happens! The ball swings the opposite direction, with no change of action on the part of the bowler. This can be very difficult to face for a batsman; top batsman can often predict by the seam direction which way the ball will swing, but with reverse swing it does exactly the opposite of what they would expect.

In practice, no bowler has ever bowled faster than 100 mph, so Reverse Swing with a new ball would be almost impossible to achieve. However, as the ball becomes older and rougher, the rough surface causes the air to become turbulent at lower speeds, so with an old ball, reverse swing can be achieved at speeds of about 80 mph, which most international fast bowlers can reach. It's for this reason that the rough side faces the batsman in reverse swinging deliveries rather than the shiny side. The devastating effect of reverse swing can be seen in the video below, skip to 3:10 for the best bit.





There is one more type of swing which isn't mentioned as often, as it is used less in top level cricket, but is perfect for amateur players. In many ways, it is the most simple type of spin. In order to bowl it, one needs to have one side smooth, and the other rough.

It uses the same principles of laminar and turbulent layers as conventional and reverse swing, but rather than use the seam to trip up the boundary layers, it uses the rough surface of one side of the ball to create turbulence
At less than 70 mph, the boundary layer over the smooth side will be laminar, and over the rough side it will be turbulent, meaning the ball will swing towards the rough side as with conventional swing. You can even try this out at home quite easily: get a tennis ball, and cover one half with duct tape, and throw it straight with the duct tape on the left, and the uncovered half on the right, and you should find that it swerves right.
However, bowling at higher speeds, more than 70 mph, like in reverse swing, the boundary layer will be turbulent on both sides of the ball. The rough side makes the air even more turbulent, meaning it detaches from the ball sooner, and the ball moves in the opposite direction to how it would at lower speeds. This happens for exactly the same reason that conventional swing switches to reverse swing at a certain critical speed.

In conclusion, we have seen that physics can explain the seemingly mysterious arts used by bowlers to try and deceive batsmen, and that "Reverse" swing is just a natural continuation of conventional swing. It is so powerful because the bowler changes nothing, it is just the physics that changes, and this creates some of the greatest contests in international cricket.

We hope you enjoyed this post. If you you want to get in touch you can follow and mention us on twitter, @theaftermatter, email us at contactus@theaftermatter.com or search "The Aftermatter"on Facebook.

Theo Caplan


Check out our last two posts:
Untitled - [yes, that's the title] (Guest post from TheCompBlog) - A guest post not about physics, but just as interesting!
What is φ, the 'Golden Ratio' - This ratio appears in everything from art to nature, but what is it? And why is it so special?

What are we posting about next:
The Physics of Football/Soccer: What is "Curl"? - How do soccer players manage to change the trajectory of the ball as it flies through the air?

If you have ideas for posts we would love to heard them. Contact details are above.

9 comments:

  1. Interesting stuff. What about when a brand new ball swings from the very outset, before one side has become rough to create the turbulence? Can this be put down to the aerodynamic imperfections of a handmade ball?

    ReplyDelete
    Replies
    1. If you look at the "Conventional Swing" diagram, the reason that the there is an aerodynamic difference is the angling of the seam, which 'trips' the air particles to create turbulence, not differences in the sides of the ball! In fact, it doesn't matter if both sides are shiny, that is why you get swing with a new ball, you just need to make sure that the side facing the batsman is as shiny as possible

      Theo Caplan
      The Aftermatter

      Delete
  2. Voor meneer Dinges (die niet weet wat swing is). All there is to know

    ReplyDelete
  3. Cricket is worse than the Catholic church.

    ReplyDelete
    Replies
    1. Your the sort of person that gives Anonymous idiots a bad name.

      Delete
  4. Is the direction of swing wrong on the last diagram? "uncovered half on the right, and you should find that it swerves right." The diagram should show the ball swinging towards the rough side? This is my experience in practice as well...

    ReplyDelete
    Replies
    1. When it says it swerves to the right, that is referring to the penultimate diagram above it. In practice this is the most common effect, but at high speeds, the rough side causes so much turbulence that the boundary layer separates earlier and it swings in the other direction.

      In other words, the bottom diagram is the equivalent of reverse swing, whilst the penultimate diagram is the equivalent of conventional swing.

      Hope that clears things up!

      Theo Caplan
      The Aftermatter

      Delete
  5. Such a great Post!! Thanks For Sharing. Are you looking to buy Leather Balls?

    ReplyDelete
  6. Great post!!! Thanks for Sharing!!!
    Are you fed up from playing with same old type of non-customized Cricket Ball? Are you looking for customized Cricket Ball? It’s all available at just a click: Cricket Ball || Cricket Leather Ball

    ReplyDelete